[Blindmath] FW: Economical tactile graphics - Microcapsule orSwellPaper in a microwave oven?

Wed Aug 10 19:05:16 UTC 2011

Below is a response from Karen Poppe regarding tracing tips when using the DRAFTSMAN.
Debbie

-----Original Message-----
From: Karen Poppe 
Sent: Wednesday, August 10, 2011 3:00 PM
To: Debbie Willis; Fred Otto
Cc: Ralph Bartley
Subject: RE: [Blindmath] Economical tactile graphics - Microcapsule orSwellPaper in a microwave oven?

Debbie,
I give some tracing tips in the guidebook. The simplest way is to merely trace the image of the print graphic first (deleting unnecessary info for simplification, of course) with a smudge-free marker or pen, then mount the film on the DRAFTSMAN Board and retrace the image to raise pre-drawn lines using the included stylus.

Another tips: Insert needed braille labels via a braillewriter before drawing the graphic. Embellish/add point symbols or other types of lines using spur wheels from the Tactile Graphics Kit. If doing the latter, you'll have to draw lines from the reverse side of the film.

Please share this information with Mr. Baldwin if you'd like.

Karen

-----Original Message-----
From: Debbie Willis 
Sent: Wednesday, August 10, 2011 2:33 PM
To: Karen Poppe; Fred Otto
Cc: Ralph Bartley
Subject: FW: [Blindmath] Economical tactile graphics - Microcapsule orSwellPaper in a microwave oven?

Hi, Karen and Fred-

Dick Baldwin has been trying to figure out how to make quick, inexpensive TGs.

I told him about some of our products (DRAFTSMAN, Picture Maker, Swail Dot Inverter, and Quick-Draw Paper.
He has questions (below) and some interesting ideas about each of these products. [I really like his idea of being able to put a print drawing either above or below the DRAFTSMAN film in order to "trace" it, but he said this does not work well. I am wondering if it could be made to work somehow.]

Would you be able to respond to him? There might be other options that you want to mention to him as well.

Let me know.

Thank you,
Debbie

-----Original Message-----
From: blindmath-bounces at nfbnet.org [mailto:blindmath-bounces at nfbnet.org] On Behalf Of Richard Baldwin
Sent: Wednesday, August 10, 2011 2:09 PM
To: Blind Math list for those interested in mathematics; Sue Mattson
Subject: Re: [Blindmath] Economical tactile graphics - Microcapsule orSwellPaper in a microwave oven?

Hi Debbie,

Thanks for the response. See my comments and questions inline with rgb] at
the left end of the first line.

On Wed, Aug 10, 2011 at 12:34 PM, Debbie Willis <dwillis at aph.org> wrote:

> Richard, there are also non-techy ways of creating some quick, inexpensive
> tactile graphics. There's a really great TG-drawing tool called the
> DRAFTSMAN Tactile Drawing Board. It is a versatile tactile drawing board
> that is used in combination with special film and a stylus to create instant
> raised-line images.  The DRAFTSMAN can be used for producing simple
> raised-line graphics, demonstrating math concepts and tasks, demonstrating
> science concepts, playing games, and much more. To read about this tool,
> visit www.aph.org and look through the current Instructional Products
> Catalog. This product is $177 and additional packets of the film (25 sheets)
> is $6.
>

rgb] I saw a demonstration of this product when I visited Sue Mattson at
TSBVI in Austin. As I recall, this requires the drawings to be completely
freehand. I believe that I placed a printed graph under the film and tried
to trace over it and it didn't work with the paper between the film and the
backboard. However, I don't believe that I tried placing the printed graph
on top of the film and tracing over it to see if that would work. Do you
know if that would work. The price of the film seems reasonable. If so, this
would be an easy and economical way to print simple graphics and then turn
them into tactile graphics.

>
> There is also the Swail Dot Inverter that can be used to construct simple
> diagrams, graphs, maps, and more by embossing a series of single dots.
>  Braille paper (sold separately) is placed on top of the 12"X12" rubber pad.
>  The special stylus allows dots to be embossed upwards by puncturing the
> paper on the down stroke and then pulling the dot upwards on the up stroke.
>  It works best with Brailon plastic braille paper that is available from
> American Thermoform (www.americanthermoform.com).  This product is $43.
>

rgb] I was unaware of that product. I will follow up on it. Do you know if
you can print the graphic on the plastic braille paper to serve as a an
embossing guide. I'm pretty sure that I could run normal Braille printer
paper through my cheap Cannon ink-squirt printer one sheet at a time. This
also looks like a cheap and easy way to emboss simple graphics. I wonder how
the effort to emboss a simple graph compares with using a tracing wheel on
the back of the paper.

>
> There is also Quick-Draw Paper that can be used to create instant tactile
> graphics that are useful for a wide variety of art, orientation and
> mobility, diagramming, and educational activities.  You simply draw on the
> paper surface with a water-based marker and the lines will swell instantly
> and become tactile.  This set of materials includes 10 sheets of 8 12"X11"
> Quick-Draw Paper, instructions in large print, and two water-based markers
> for $32.
>

rgb] I was also unaware of this product. Do you know if it can be run
through an ink-squirt printer? The ink may cause the swelling and gum up the
printer. If the ink doesn't cause the swelling and it can be run through the
printer, a sighted assistant could go over the lines with a water-based
marker to produce the desired swelling. It looks like the paper might be
fairly expensive though.

>
> Picture Maker: Wheatley Tactile Diagramming Kit is another useful product.
> This fun, colorful tactile board includes a felt covered board measuring 20
> 3/4"X13", and a wide variety of Velcro-backed pieces that attach to the
> board in an infinite number of patterns.  It features over 100 pieces in
> many shapes, sizes, textures, and colors.  Extra hook Velcro materials is
> provided for helping to create additional tactile pieces.  The large
> print/braille guidebook has suggestions and example layouts.  Picture Maker
> is $118.  There are additional Picture Maker packets available; one is
> "Textured Strips" and costs $79; another is "Storage Panel" which is $18.
>  There is also a set of Picture Maker Accessories: Geometric Textured Shapes
> for $50.
>

rgb] I also wasn't aware of this. I will take a look at it but I doubt that
it fits the need.

>
> All of the above products are pictured and discussed in the current
> Instructional Products Catalog available on the APH website at www.aph.org  I hope this information on other types of products available for creating
> quick tactile graphics is helpful.
>

rgb]  Thanks again,
Dick Baldwin

>
> Debbie Willis, APH
>
>
>
> -----Original Message-----
> From: blindmath-bounces at nfbnet.org [mailto:blindmath-bounces at nfbnet.org]
> On Behalf Of Richard Baldwin
> Sent: Wednesday, August 10, 2011 11:03 AM
> To: BlindMath Mailing List
> Subject: [Blindmath] Economical tactile graphics - Microcapsule or
> SwellPaper in a microwave oven?
>
> I keep thinking that one of the big needs in teaching STEM courses to blind
> students is the need to quickly, easily, and economically create tactile
> graphics from printed graphs and images.
>
> I have read about using Microcapsule or Swell Paper, which seems like a
> reasonable approach except that the heating devices are relatively
> expensive
> (more than the cost of an HP laptop) and not portable.
>
> Every teacher's lounge in K-12 and every student lounge in college has a
> microwave oven. Many faculty members have a microwave oven in their office.
> Has anyone tried heating a printed piece of swell paper in a microwave oven
> to see how it reacts?  If it doesn't react well by itself, would it help to
> sandwich it between two pieces of the silver crisping cardboard that comes
> with frozen pizza? Or how about sandwiching it between two of the
> gel-filled
> pads that are designed to be heated in a microwave oven and then applied to
> sore joints? That would tend to provide a more uniform heat to the surface
> of the paper. I have been unable to find any specifications regarding the
> temperature requirements for causing the microcapsules to swell.
>
> What can we do to dramatically improve the availability of custom-made
> tactile graphics?
>
> Is there a group or list that concentrates on such issues.  I found a list
> named Adapted Graphics for the blind and visually impaired (Adapted
> Graphics) but I was unable to navigate the interface to get registered, and
> in any event, there didn't appear to be any recent posts in the archives?
>
> Dick Baldwin
>
> --
> Richard G. Baldwin (Dick Baldwin)
> Home of Baldwin's on-line Java Tutorials
> http://www.DickBaldwin.com
>
> Professor of Computer Information Technology
> Austin Community College
> (512) 223-4758
> mailto:Baldwin at DickBaldwin.com
> http://www.austincc.edu/baldwin/
> _______________________________________________
> Blindmath mailing list
> Blindmath at nfbnet.org
> http://www.nfbnet.org/mailman/listinfo/blindmath_nfbnet.org
> To unsubscribe, change your list options or get your account info for
> Blindmath:
>
> http://www.nfbnet.org/mailman/options/blindmath_nfbnet.org/dwillis%40aph.org
>
> _______________________________________________
> Blindmath mailing list
> Blindmath at nfbnet.org
> http://www.nfbnet.org/mailman/listinfo/blindmath_nfbnet.org
> To unsubscribe, change your list options or get your account info for
> Blindmath:
>
> http://www.nfbnet.org/mailman/options/blindmath_nfbnet.org/baldwin%40dickbaldwin.com
>

-- 
Richard G. Baldwin (Dick Baldwin)
Home of Baldwin's on-line Java Tutorials
http://www.DickBaldwin.com

Professor of Computer Information Technology
Austin Community College
(512) 223-4758
mailto:Baldwin at DickBaldwin.com
http://www.austincc.edu/baldwin/
_______________________________________________
Blindmath mailing list
Blindmath at nfbnet.org
http://www.nfbnet.org/mailman/listinfo/blindmath_nfbnet.org
To unsubscribe, change your list options or get your account info for Blindmath:
http://www.nfbnet.org/mailman/options/blindmath_nfbnet.org/dwillis%40aph.org