[Diabetes-talk] Solus V2 Strips

[Mark Tardif]

This leads to a funny story.  Now I test near the bathroom or kitchen sink, 
but at first, I wasn't doing that.  So one day, one of my neighbors asked me 
why there were drops of blood on my clothes.  But yes, have a paper towel 
and I would suggest washing your hands again after you test.



Mark Tardif
Nuclear arms will not hold you.
-----Original Message----- 
From: Eileen Scrivani via Diabetes-talk
Sent: Thursday, March 03, 2016 3:48 PM
To: Diabetes Talk for the Blind
Cc: Eileen Scrivani
Subject: Re: [Diabetes-talk] Solus V2 Strips

Daniel,

After I stick my finger, I squeeze gently a couple of times to be sure I 
have a decent drop.  Holding palm face up and keeping fingers as straight as 
possible, I pick up the meter with the other hand and strip already in it. 
I drag the flat, narrow edge of the strip along the finger, starting at the 
first joint (usually this is below the area where the droplet is located). 
Slowly, keep dragging the strip towards the tip of your finger.  If you don’t 
get a hit, go back to the joint and try it again, maybe, adjusting the 
location to more middle of the finger, drag it up towards the finger tip. 
Stop when it starts with the message that the test is in process and just 
let it gently rest against the finger in that area.

For neatness sake, you might want to have a paper towel folded up so if the 
drop runs it won’t wind up on your furniture and you can wipe off your hands 
too.

Remember if your hands are cold it can be difficult to get a drop of blood. 
I usually wash with warm, not hot water before a test.It will also help you 
to use moisturizer during the day to prevent your fingers from becoming to 
dry from washing and testing.  Don’t put moisturizer on just prior to a test 
you don’t want it corrupting your readings.

Hope this helps.

Eileen

From: Daniel Chavez via Diabetes-talk
Sent: Thursday, March 3, 2016 10:49 AM
To: Diabetes Talk for the Blind
Cc: Daniel Chavez
Subject: [Diabetes-talk] Solus V2 Strips

Hi,
A few questions about the Solus V2 strips.
1. Where would I be able to get more strips for the Solus V2 if I needed to?
2. Do you know of any different cases other than the stock hard shell case 
that comes with the Solus V2, I can get? I was looking for one that'll be 
able to fit the lancet device, at least a week's worth of lancets, the 
meter, and at least 1 bottle of test strips.
The stock hard shell case fits all of that stuff, however, for me at least, 
it's hard to pack everything with one try. It takes me at least 3 tries 
before everything is packed enough for the case to close properly.
For any Solus V2 users
3. What corner of the strip am I suppose to align the blood to? I tried both 
corners, but perhaps, I might be doing something wrong.
I think once, I was able to get it, but can't seem to get it consistently.
What tips (from Solus V2 users), could be provided to me in successful blood 
alignment with the Solus strips?
I try and lie my hand flat, poke my finger, litely pinch it to draw blood, 
then align the strip to my finger. Though maybe I'm not aligning it 
correctly.
Thanks for your help.
_______________________________________________
Diabetes-talk mailing list
Diabetes-talk at nfbnet.org
http://nfbnet.org/mailman/listinfo/diabetes-talk_nfbnet.org
To unsubscribe, change your list options or get your account info for 
Diabetes-talk:
http://nfbnet.org/mailman/options/diabetes-talk_nfbnet.org/etscrivani%40verizon.net
_______________________________________________
Diabetes-talk mailing list
Diabetes-talk at nfbnet.org
http://nfbnet.org/mailman/listinfo/diabetes-talk_nfbnet.org
To unsubscribe, change your list options or get your account info for 
Diabetes-talk:
http://nfbnet.org/mailman/options/diabetes-talk_nfbnet.org/markspark%40roadrunner.com


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6189 / Virus Database: 4537/11734 - Release Date: 03/02/16