[gui-talk] Router ID

[Rob Tabor]

Good evening listmembers and especially Kris,

As your question seems to portend, you need to invoke command line interface
(CLI) to cause the system to reveal your router's ID, which involves 6
steps.
1. Type start > run> cmd and press Enter.
2. At the DOS console type ipconfig.
3. Note the IPV4 address in the screen output. This is a string of 4 sets of
3 digits separated by decimal points and will most likely begin with
192.168. 
4. Type exit to return your Windows Screen to Graphic User Intgerface (GUI)
mode.
5. Launch your web browser.
6. Execute the file open location command.
7. Type the IPV4 address into the URL entry box and press Enter.

At that point you should get your ISP's web page with several useful pieces
of information including your router's ID.  Good luck and HTH.
Best regards,
Rob Tabor & Guide Cane Raúl Junior

-----Original Message-----
From: gui-talk-bounces at nfbnet.org [mailto:gui-talk-bounces at nfbnet.org] On
Behalf Of Kris Hickerson
Sent: Sunday, March 11, 2012 12:31 PM
To: gui-talk at nfbnet.org
Subject: [gui-talk] Router ID

Hi Everyone, 

 

There is a command you can enter to locate your router's ID, but I can't
remember what it is.  I also don't remember if you enter it from the
desktop, but I'm thinking you don't.

 

Does anyone know what I'm talking about?  I've entered what I believed to be
the correct address, but I'm not getting anywhere. 

 

Thanks. 

 

Kris

_______________________________________________
gui-talk mailing list
gui-talk at nfbnet.org
http://nfbnet.org/mailman/listinfo/gui-talk_nfbnet.org
To unsubscribe, change your list options or get your account info for
gui-talk:
http://nfbnet.org/mailman/options/gui-talk_nfbnet.org/rob.tabor%40sbcglobal.
net