[NFB-Blind-Crafters] FW: macrame info for interested students

[carcione at access.net]

Here is the info for Annie Maxwell's macrame class, which will start next
Monday, September 8, at 1:00 PM Eastern.

Tracy

 

 

From: anniemaxwell46 at gmail.com <anniemaxwell46 at gmail.com> 
Sent: Monday, September 1, 2025 1:39 PM
To: carcione at access.net
Cc: anniemaxwell46 at gmail.com
Subject: macrame info for interested students

 

Hi Tracie,

I am pasting some general information regarding macrame supplies and basic
instructions for the 1:00 class beginning on September 8.  In our first
class students will need a macrame board with pins or whatever they can find
to keep their work stabilized.  A short dowel of approximately 6-inches long
on which to mount cords and 6-8mm macrame cord of any type for practicing.
The rest of the information is for remaining classes.

 

 

MACRAME INFORMATION FOR CLASSES

 

you're ready to start learning how to macrame, gather your supplies and
familiarize yourself with some common macrame terms you'll need to know.

Important Macrame Terms

There are a few important macrame terms you'll need to know before you can
get started.

*	Working Cord: The cord or set of cords that you use to make the
actual knots.
*	Filler Cord: The cord or set of cords that your knots wrap around.
*	Sennit: A knot or set of knots that are worked in repeat.

 

Supplies and Materials

Macrame board and t-pins

 

Macrame Cord: This can be just about any kind of cord, twine, or rope made
out of cotton, hemp, jute, or synthetic material. It comes in different
sizes, colors, and twists. Leather is another choice as well.

 

Support: You'll need something to tie your knots to. Popular choices include
dowel rods, branches, hoops, or rings.  Cords are also choices to use for
mounting.

 

Embellishments such as beads (wooden, ceramic, plastic and glass);

Decorative pendants (metals, wire, wood, plastic, fabrics, etc.);

Rings (wooden, metal, plastic, bamboo of all diameters and thickness); 

Dowels (various widths, lengths, and decorative styles).  

 

Types of Projects to make

Wall hangings, towel hanger, hanging plant holder, keyrings, belts, purses,
curtains, jewelry, baskets, place mats, center pieces, etc.

 

BASIC KNOTS

Lark's Head Knot

The first knot you'll need to know is the Lark's Head Knot, sometimes
referred to as a Cow Hitch Knot. This knot is what gets your macrame cords
attached to an object, such as dowel, branch, or an anchor cord.

Fold your cord in half and place the loop over the dowel rod.

 Bring the loop around the back and pull your two cord ends through the loop
to tighten.

 

Reverse Lark's Head Knot

A Reverse Lark's Head Knot is done in the reverse, so the bump is hidden in
the back of the knot.

Fold the cord in half and place the loop under the dowel rod.

 Bring the loop round to the front and pull your two cords through the loop
to tighten.

 

Square Knots and Half Knots

A square knot is one of the most widely used macrame knots and it can be
created as left facing or right facing.

A half knot is simply half of a square knot. It can be right facing or left
facing, depending on which side you start on.

Square knots need to have at least 4 cords (2 working cords and 2 filler
cords) but can have more. The first and last cords are the working cords.
We'll call them working cord 1 and 4. The middle cords are filler cords and
we'll number those 2 and 3. These cords will switch places but will still
keep their original numbering.

Left Facing Half Knot and Square Knot

A left facing square knot has a vertical bump on the left side of the
finished knot.

Take the first cord (working cord 1) and move it to the right over the
middle filler cords (filler cords 2 and 3) and under the last cord (working
cord 4).

 Take working cord 4 and move it to the left under the two filler cords and
over working cord 1.

  Pull both working cords to tighten, keeping the filler cords straight.
This is a left facing half square knot.

 The working cords have now switched places with working cord 1 on the right
and working cord 4 on the left. Take working cord 1 and move it to the left
over the two filler cords and under working cord 4.

 Take working cord 4 and move it to the right under the two filler cords and
over working cord 1.

 Pull both working cords to tighten. keeping the filler cords straight. This
completes your left facing square knot.

 

Right Facing Half Knot and Square Knot

A right facing half knot and square knot has a vertical bump on the right
side of the finished knot.

Take the last cord (working cord 4) and move it to the left, over the filler
cords (cords 2 and 3) and under the first cord (working cord 1).

 Take working cord 1 and take it to the right, under the filler cords and
over working cord 4.

 Pull both cords to tighten, keeping everything straight. This is a right
facing half square knot.

 The working cords have now switched places and working cord 1 is on the
right and working cord 4 is on the left. Take working cord 4 over to the
right, over the filler cords and under working cord 1.

 Take working cord 1 and move it to the left, going under the filler cords
and over working cord 4.

 Pull both working cords to tighten. This is a right facing square knot.

 

Spiral Stitch

A Spiral Stitch, also called a Half Knot Sinnet or Half Knot Spiral, is a
series of half knots to create a spiral stitch. This is a decorative knot
that will add a lot of interest to your project.

A spiral stitch needs at least 4 cords, 2 working and 2 filler cords, but
more can be used. Mentally number these cords 1-4 moving left to right.
Cords 1 and 4 are your working cords and cords 2 and 3 are your filler
cords.

These directions are how to make a left facing spiral stitch, but you can
also start on the right side and use all right facing half knots.

Take working cord 1 and move it to the right, over the filler cords but
under working cord 4.

 

Move working cord 4 to the left, going under the filler cords but over
working cord 1.

 Pull both working cords to tighten around the filler cords.

 Keep making more half knots the same way as above. As you work, your cords
will start to spiral.

 

Clove Hitch

A Clove Hitch, also called a Double Half Hitch, creates lines in your
projects. They can be worked horizontally, diagonally, and on occasion,
vertically.

Horizontal Clove Hitch

A Horizontal Clove Hitch creates a series of knots that go across your
macrame project. In this knot, the first cord is the filler cord and rest of
the cords are working cords.

Take your left cord, the filler cord, and hold it horizontally across the
other cords.

 Take the next cord (your first working cord) and bring it forward, up, and
around the filler cord towards the left to form a counter-clockwise loop.

 Take the same working cord and to the right of the first knot, take it up,
over, and through the loop. There should now be two knots sitting next to
each other. This is a horizontal clove hitch knot.

Repeat the clove hitch knots by using the next working cord around the same
filler cord. Continue creating knots until you have the look you want.

 

 Diagonal Clove Hitch

A Diagonal Clove Hitch creates a series of diagonal knots in your project.

Take the cord on the left, the filler cord, and hold it diagonally across
the other cords.

Repeat steps 2 through 4 of the horizontal clove hitch, moving down
diagonally instead of straight across. Repeat until you have the look you
want.

 

Overhand Knot

The Overhand Knot is a basic knot that ties multiple cords together. It can
be done with multiple cords or just one cord.

Fold the cord into a loop.

Pass the ends of the cords through the loop to tighten.

 

Gathering Knot

A Gathering Knot, also called a Wrapping Knot, is a finishing knot that
gathers cords together. You'll often see these at the bottom of macrame
plant hangers. There are two working cords in this knot; the rest of the
cords are filler cords.

Take a separate length of cord (this will be your working cord) and form a
long u-shaped loop on top of the group of filler cords, with the loop facing
down.

 

Starting below the top end of your working cord-which is pointing up-wrap it
around the filler cords and the loop. Make sure that you leave a little bit
of the loop uncovered.

Pass the end of the wrapping cord through the loop at the bottom of your
wraps.

Pull the end of the working cord-that's sticking up at the top-upwards,
which will bring the loop under the wraps. Pull until the loop is enclosed
in the wraps.

Your gathering knot is complete! If you'd like, trim both ends of the
working cord for a clean finish.

 

 

 

 

 

 

 

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://nfbnet.org/pipermail/nfb-blind-crafters_nfbnet.org/attachments/20250901/c0e50205/attachment.htm>