[NFB-Krafters-Korner] Sewing Machines?

Sat Sep 1 19:09:11 UTC 2018

The way it works with the patch pockets is to place them where you want them
on the garment, pin them in place then sew them on.  For things like that I
have lined the right edge of the presser foot with the edge of the patch
pocket and gone around three sides, starting out with the needle placement
check to make sure I am lined up correctly.  When you come to corners, you
do the needle check thing as you are getting to the edge of the pocket.
When the needle is where you want it, with needle position down, turn the
fabric 90 degrees, make sure you are lined up straight, then sew your second
edge.  That's the way to do corners.  It takes longer to describe it than to
do it.

Judy

-----Original Message-----
From: NFB-Krafters-Korner [mailto:nfb-krafters-korner-bounces at nfbnet.org] On
Behalf Of Dani Pagador via NFB-Krafters-Korner
Sent: Saturday, September 1, 2018 4:19 AM
To: List for blind crafters and artists
Cc: Dani Pagador
Subject: Re: [NFB-Krafters-Korner] Sewing Machines?

Then I guess I'm dated, too. I remember the treadle machine and miss
it. My Grandma on my Mom's side had one, a Singer, I think, and that
was the first machine I tried sewing with.

It's been 35 years since home ec class, but I can do a basic straight
seam if there's a guide, and have done the  basic bag, pillow, pillow
case. But curves and zippers daunt me, and I can't imagine how to go
about sewing a smaller pocket on top of a bigger piece of material.
I'm out of practice re the sewing machine.

I'll go see if I can get hold of some material. I'd like to start
sewing again, and the first thing I'd like to make is a needle holder
to organize my knitting needles and crochet hooks. I see it rolling
up, and think it'd be an apron type thingy with a big pocket or two
that has partitions. I can also see it hanging behind my closet door.

I also need something like that for my hair ties and clips. I'm so
intrigued by the possibilities. I'm so inspired to know there are
other blind people who sew, that I'll be able to do it too if I work
at it and put my mind to it.

I also need to learn to sew because my Mom makes all of my clothes.
I'm four-feet-nine and can't find anything I like in the
stores--everything is either too long or too short. I want to be able
to make clothes in styles that suit me, as opposed to having to chase
fashion trends that more than likely won't work.

But like I said above, I'm inspired now by your responses. I'll share
them with my husband, and between the list and the two of us here,
plus my Mom, we'll get me sewing somehow.

Thanks,
Dani

On 8/31/18, Judy Jones via NFB-Krafters-Korner
<nfb-krafters-korner at nfbnet.org> wrote:
> I have a Pfaff machine I bought back in the early 90s, but we also have a
> working antique treadle I tought the girls on, and when I was a teen I
used
> my mom's Singer Featherweight.  That does date me.
>
> Judy
>
>
> -----Original Message-----
> From: NFB-Krafters-Korner [mailto:nfb-krafters-korner-bounces at nfbnet.org]
> On
> Behalf Of Ramona Walhof via NFB-Krafters-Korner
> Sent: Friday, August 31, 2018 6:03 PM
> To: 'List for blind crafters and artists'
> Cc: Ramona Walhof
> Subject: Re: [NFB-Krafters-Korner] Sewing Machines?
>
> Thank you, Judy.  Didn't know you sewed.
> Ramona
>
> -----Original Message-----
> From: NFB-Krafters-Korner [mailto:nfb-krafters-korner-bounces at nfbnet.org]
> On
> Behalf Of Judy Jones via NFB-Krafters-Korner
> Sent: Friday, August 31, 2018 4:16 PM
> To: 'List for blind crafters and artists' <nfb-krafters-korner at nfbnet.org>
> Cc: Judy Jones <sonshines59 at gmail.com>
> Subject: Re: [NFB-Krafters-Korner] Sewing Machines?
>
> Oh yeah, what you want to do sounds definitely possible.
>
> There has been a book out there called, So What About Sewing.  If you
> Google
> the title, you may be able to find it.
>
> I have not used a surger, so can't address that, but first started sewing
> in
> our home ec class in junior high at the Colorado school for the blind.
> I've
> made dresses and pants for myself, but has been a long time ago.
>
> When taking something in, in general, pin where you want to sew, then,
once
> sewn, trem the extra off from the seam.  Much easier than cutting first,
> then making this narrow narrow seam.
>
> While raising kids, and now, I mainly use my machine to do mending, put in
> zippers when I want one, and modify clothing.  I always have to hem my
> husband's new pants, they are always 2 or 3 inches too long.
>
> Seam guides are great, but for those times when not appropriate, I
position
> my cloth under the presser foot where I want to start.  Lift the presser
> foot leaver up, and slowly turn the wheel counter clockwise with your
right
> hand, and you will feel the needle tip coming down with your left hand
> under
> the lifted presser foot.  You can position it exactly.  Then turn the
wheel
> the rest of the way so the needle penetrates the cloth and sort of anchors
> it for starting.  Push the leaver back down to put the presser food back
in
> place.
>
> On the presser foot, there is a notch in the middle aligned with the
> needle,
> so if you sew, you can keep your fingers close to that presser foot notch,
> or make sure everything is aligned correctly before you start and sew
> slowly.  Make sure your fingers are flat so  the moving needle doesn't
> catch
> them.  I usually have my right hand up by that presserfoot, and guide the
> cloth with my left.  If I'm not sure or feel I need to check my needle
> placement, I stop the machine.
>
> You can sew a curved seam in this way as well, as well as using those
> selvage finishing stitches.
>
> If you want to check your needle placement, stop the machine in the needle
> down position, lift up the presser foot and you can feel exactly where
your
> needle is.
>
> For sewing zippers, I like to pin my zipper in first, then use the regular
> presserfoot and sew from the top of one side, taking out pins as I go.
> Then
> sew across the bottom, turn, and back up the other side toward the top,
> taking out pins as you sew.
>
> Not too long ago, my daughters gave me a tie robe, but I wanted a zipper,
> so
> put one in.  If you're doing that, you want to make sure the zipper is on
> the straight edge, and not on the rounded part that makes the garment
flair
> out.
>
> For patterns, the only sighted assistance you need is cutting the extra
> tissue from the pattern edges on the inked line, and tape to mark any
> darts.
> People in fabric stores are great at helping with that.
>
> Practice on some sheets of paper or scrap cloth.  Make yourself some
curved
> or rounded edges.Let us know how it goes.
>
> Judy
> -----Original Message-----
> From: NFB-Krafters-Korner [mailto:nfb-krafters-korner-bounces at nfbnet.org]
> On
> Behalf Of Dani Pagador via NFB-Krafters-Korner
> Sent: Friday, August 31, 2018 2:02 PM
> To: List for blind crafters and artists
> Cc: Dani Pagador
> Subject: [NFB-Krafters-Korner] Sewing Machines?
>
> Hi, Everyone.
> I'm coming out of lurkdom to ask if it's possible to learn to use a sewing
> machine beyond just sewing straight seams. I have a seam guide and access
> to
> a surger and an industrial strength sewing machine--my Mom used to sew out
> of her home and has four or five different machines that she might let me
> use if I could help her be comfortable with the idea, and could get help
> learning how to use them. I need too decrease the size of a bed
encasement,
> which would mean taking it apart and cutting the fabric down to fit my
> matress, then sewing it up again, including a zipper and Velcro closures.
> The concept seems easy enough to do aside from the zipper learning curve.
> What are your thoughts?
>
> I know I could probably bring it to Mom and get her to do it, but I want
to
> be able to work with the machines and materials and concepts myself and
> manage my own sewing project needs. I've always wanted to learn to sew,
but
> there's no local resource. My local VR center has a manual
arts/woodworking
> class, but no sewing class. And I don't want to have to enroll in the
whole
> program just to be able to take a sewing class.
>
> Mom is in her seventies, and I want her to be around for a looong time
yet,
> but have to think about that she might not be for some unforeseen reason.
I
> want to learn to sew to keep her with me after she's gone.
>
> Thanks,
> Dani
>
> _______________________________________________
> NFB-Krafters-Korner mailing list
> NFB-Krafters-Korner at nfbnet.org
> http://nfbnet.org/mailman/listinfo/nfb-krafters-korner_nfbnet.org
> Division Website:  http://www.krafterskorner.org Facebook page:
> https://www.facebook.com/pages/NFB-Krafters-Division/269246643109571
> Krafters-Korner Blog http://krafterskorner.org/ "Follow NFB Krafters
Korner
> on Twitter: Our Handle is @craftingblind Don't have a Twitter account? You
> can still follow Krafters Korner on Twitter. Go to:
> Twitter.com/craftingblind To unsubscribe, change your list options or get
> your account info for
> NFB-Krafters-Korner:
>
http://nfbnet.org/mailman/options/nfb-krafters-korner_nfbnet.org/sonshines59
> %40gmail.com
>
>
> _______________________________________________
> NFB-Krafters-Korner mailing list
> NFB-Krafters-Korner at nfbnet.org
> http://nfbnet.org/mailman/listinfo/nfb-krafters-korner_nfbnet.org
> Division Website:  http://www.krafterskorner.org Facebook page:
> https://www.facebook.com/pages/NFB-Krafters-Division/269246643109571
> Krafters-Korner Blog http://krafterskorner.org/ "Follow NFB Krafters
Korner
> on Twitter: Our Handle is @craftingblind Don't have a Twitter account? You
> can still follow Krafters Korner on Twitter. Go to:
> Twitter.com/craftingblind To unsubscribe, change your list options or get
> your account info for NFB-Krafters-Korner:
>
http://nfbnet.org/mailman/options/nfb-krafters-korner_nfbnet.org/walhoframon
> a%40gmail.com
>
>
> _______________________________________________
> NFB-Krafters-Korner mailing list
> NFB-Krafters-Korner at nfbnet.org
> http://nfbnet.org/mailman/listinfo/nfb-krafters-korner_nfbnet.org
> Division Website:  http://www.krafterskorner.org
> Facebook page:
> https://www.facebook.com/pages/NFB-Krafters-Division/269246643109571
> Krafters-Korner Blog http://krafterskorner.org/
> "Follow NFB Krafters Korner on Twitter: Our Handle is @craftingblind
> Don't have a Twitter account? You can still follow Krafters Korner on
> Twitter. Go to: Twitter.com/craftingblind
> To unsubscribe, change your list options or get your account info for
> NFB-Krafters-Korner:
>
http://nfbnet.org/mailman/options/nfb-krafters-korner_nfbnet.org/sonshines59
> %40gmail.com
>
>
> _______________________________________________
> NFB-Krafters-Korner mailing list
> NFB-Krafters-Korner at nfbnet.org
> http://nfbnet.org/mailman/listinfo/nfb-krafters-korner_nfbnet.org
> Division Website:  http://www.krafterskorner.org
> Facebook page:
> https://www.facebook.com/pages/NFB-Krafters-Division/269246643109571
> Krafters-Korner Blog http://krafterskorner.org/
> "Follow NFB Krafters Korner on Twitter: Our Handle is @craftingblind
> Don't have a Twitter account? You can still follow Krafters Korner on
> Twitter. Go to: Twitter.com/craftingblind
> To unsubscribe, change your list options or get your account info for
> NFB-Krafters-Korner:
>
http://nfbnet.org/mailman/options/nfb-krafters-korner_nfbnet.org/daniknits%4
0gmail.com
>

_______________________________________________
NFB-Krafters-Korner mailing list
NFB-Krafters-Korner at nfbnet.org
http://nfbnet.org/mailman/listinfo/nfb-krafters-korner_nfbnet.org
Division Website:  http://www.krafterskorner.org
Facebook page:
https://www.facebook.com/pages/NFB-Krafters-Division/269246643109571
Krafters-Korner Blog http://krafterskorner.org/
"Follow NFB Krafters Korner on Twitter: Our Handle is @craftingblind
Don't have a Twitter account? You can still follow Krafters Korner on
Twitter. Go to: Twitter.com/craftingblind
To unsubscribe, change your list options or get your account info for
NFB-Krafters-Korner:
http://nfbnet.org/mailman/options/nfb-krafters-korner_nfbnet.org/sonshines59
%40gmail.com