[NFB-Krafters-Korner] Rocking Chair students

[blindhands at aol.com]

Home work:

 

With rockers bottom piece pointing in the same direction, take half pin and
measuring approximately 1 inch from rounded tip glue flat side down to top
of rocker side piece having rockers spaced length of clothespin apart . Bump
side is facing up. .  Glue half of pin approximately 1 inch from rounded end
on  opposite  side of .  Flat side down.  These are spacers holding  the two
rockers parallel to each other. 

 

Take 3 halves lay 2 half pins with flat side down.  Measure ¾” from rounded
end glue half pin pin to  the 2 half pins creating an HH .  Glue half pin to
these 2 pins bump side facing up.  Remember the cross pin is ¾” up from
rounded ends

 

Joyce Kane

Kane Kids Shop

 <https://www.etsy.com/shop/KaneKidsShop?ref=shop_sugg>
https://www.etsy.com/shop/KaneKidsShop?ref=shop_sugg