[NFBF-Tampa] TONFB TAMPA chapter list

[Ineko Gary]

Hi, this is the website to fill them where you can get a phone pouch you
can hang around your neck and then it has another dense strap. It goes
around your midsection and hold it in place.

The back of your phone, where you have the camera and light that faces
through the little window. And then, if you use any apps on your phone,
like be my eyes or any other app that uses the back of your camera, you can
use it hands-free.

And I checked the price it’s $76.00. And you can have them print anything
you want on the pouch.

It’s for people in wheelchairs, people that use guided dogs, white cane,
for all disabilities across the board.

So I just wanted to take the time and share this link.


I hope that your screen readers and or voice overs can describe what the
picture is from field. It’s a pouch where you could put your cell phone in
and other things.

If you have any questions, don’t hesitate to ask me.

   - modal
   - [image: An angled open view of the Navi badge zippered pouch with the
   phone secured along the velcro panel, and a pen is in the pen loop on the
   side.]
   Open media 2 in modal
   - [image: A square zippered case is open to reveal a bright red lining
   and one side a black, soft velcro material where the phone holster can be
   attached freely. Diagram shows to line up the camera with the small window
   on the front.]
   Open media 3 in modal
   - [image: A Suare zippered pouch with a 3 x 5 clear plastic window on
   the lower half. The bright lining shows through when no badge is placed in
   the window. There is a small square opening at the top to place the camera.
   Wide neck strap and thinner waist strap, and a Feeldom braille label runs
   across the middle.]
   Open media 4 in modal
   - [image: A person wearing the Navi Badge on the front of the upper
   body. Neck and waist straps secure the square pouch in place.]
   Open media 5 in modal
   - [image: Side view of a person wearing the Navi Badge on the front of
   the upper body. Slim profile is about 1 inch thick. Neck and waist straps
   secure the square pouch in place.]
   Open media 6 in modal
   - [image: The back of the Navi-Badge pouch has a breathable mesh padded
   pocket in black, with a black snap closure at the top. There are four small
   D rings in each corner to attach the neck and waist straps.]
   Open media 7 in modal
   - [image: The side view of the pouch shows a less than 1 - inch slim
   profile with high-contrast white zipper rings. The zipper goes almost all
   the way around the pouch.]
   Open media 8 in modal
   - [image: An open view of the inside of the Navi Badge showing an inner
   zipper pocket as well as an easy access slot to put in the 3 x 5 inch
   badge. The phone which is secured in its holster, is attached to the velcro
   backing. There are two bright colored pen loops on either side. The square
   camera window is at the top, and a bit to the right.]
   Open media 9 in modal
   - [image: Close up detail of someone putting a 3 x 5 inch badge into the
   inner badge slot, so that the badge will show through the clear plastic
   window on the front. The inner side of the badge slot is also a zipper
   pocket.]
   Open media 10 in modal
   - [image: Close up of the inner zipper pocket in the Navi Badge pouch. A
   single zipper ring is zipped open to show a business card and a credit card
   inside, with plenty of room left over.]
   Open media 11 in modal
   - [image: Details of the black phone holster that comes in the Navi
   Pouch, showing 3 important features: 1. Non-slip armortex, rubber-coated
   neoprene fabric on the inside. 2. Ultra-fine velcro backing and closure
   that is thin, easy to touch and holds very strongly. 3. The Glow in the
   dark rubber FEELDOM logo label on the edge to make it easy to locate and
   open the holster.]
   Open media 12 in modal
   - [image: A large smartphone is secured in the phone holster, which is a
   2 inch wide velcro strip around the middle of the phone. A thinner,
   adjustable strap runs from the middle of the holster around the bottom and
   back up to the other side, so that the phone can sit securely at the
   desired height.]
   Open media 13 in modal
   - [image: Instructions: Step 2 for putting the phone in the holster.
   Fold the left flap over first, then the right flap will fold over tightly
   to secure.]
   Open media 14 in modal
   - [image: The side by side components of the Navi Badge laid out in
   order: 1. A thin waist strap 2. A thick neck strap 3. A black phone holster
   4. A zippered square pouch.]
   Open media 15 in modal
   - [image: Instructions for putting the phone in its holster by folding
   the left and right sides of the main band around the center of the phone,
   camera side up, and then attaching it to the inside of the Navi Badge case,
   aligning the phone camera up to the small window in the upper front. The
   bottom strap of the holster can be adjusted to make the phone sit at the
   desired height.]
   Open media 16 in modal
   - [image: Side angle view of unzipped pouch showing the smartphone held
   in the holster which is stuck to the inside of the pouch using velcro.
   There's a small loop inside as a pen holder. The lining is aqua blue.]


   I FEEL

   Pay
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://nfbnet.org/pipermail/nfbf-tampa_nfbnet.org/attachments/20250828/fc6c196e/attachment.htm>